Motorcycle Storage Solutions

Motorcycle Storage

5’ x 10’ 
Smaller units can accommodate motorcycles

Motorcycle Storage Facility
Recreational Vehicles

We offer car storage at various locations across Toronto with drive-up and heated storage units.

Recreational Vehicles Storage
Car Storage

10’ x 20’
This size can store most cars & small

Car Storage Facility
Truck Storage

20’ x 30’ 
Equivalent to a larger garage for storing trucks

Truck Storage Facility
Boat Storage

Indoor & outdoor boat storage available depending on size.

Boat Storage Facility
RVs & Trailers

Outdoor parking available for RVs & Trailers

RV's and Trailer Storage

Motorcycle Storage Near You

Recreational Bike Quad Storage Driveup

How much does it cost to store a motorcycle?

Pricing and cost of motorcycle storage varies depending on your needs, we are constantly having various promos and storage unit deals that will help you save!

Our pricing is visible and can be found directly on our Depotium website. Once you find the Motorcycle Storage location that interests you, all you need to do is click the ”Drive-up” feature in the filter and instantly see our Motorcycle storage prices.

What size storage do I need for a motorcycle?

If you are wondering what size storage you need for a motorcycle, we suggest a 5 x 10 storage unit to start, check out our guide below if you are planning to store more than one motorcycle. 

  • 1 Motorycle = 5 x 10 storage unit
  • 2 Motorcycles = 10 x 10 storage unit
  • 3 Motorcycles = 10 x 15 storage unit

Storing your motorcycle for the winter can be tough, but rest assured our professional staff and secure locations will ensure your motorcycle will be waiting for you next season.

Motorcycle Storage Unit


The best way to store a motorcycle during the winter is in a clean, dry environment, such as a drive-up storage unit. It is also important to properly prepare the motorcycle for storage by cleaning it, adding a fuel stabilizer to the gas tank, and properly inflating the tires.

There are several ways to protect your motorcycle from rust and corrosion while in storage:

  1. Clean the motorcycle thoroughly before storing it, paying special attention to removing any dirt or grime from metal surfaces.
  2. Use a corrosion-preventive spray or oil on all metal parts, including the chain, sprockets, and exposed metal on the frame and engine.
  3. Keep the motorcycle covered with a breathable cover to protect it from dust and moisture.
  4. Keep the tires properly inflated to prevent flat spotting and to reduce the risk of the motorcycle falling over.
  5. Start your motorcycle periodically during storage to circulate the oil and prevent rust from forming inside the engine.
  6. Disconnect the battery and store it in a place where the temperature is moderate.
  7. Use a moisture-absorbing pack in the storage unit to absorb any moisture that may accumulate.

By following these steps, you can help protect your motorcycle from rust and corrosion while it is in storage.

It is generally recommended to store your motorcycle with a full tank of gas.

When the gas tank is full, there is less room for air and less oxygen in the tank which can help prevent the formation of condensation. Condensation can lead to water contamination in the fuel system, which can cause rust and corrosion.

Additionally, when you store your motorcycle with a full tank of gas, it also helps to protect the fuel system by keeping the internal parts coated in fuel. This can help to prevent the rubber seals from drying out and cracking.

However, it is important to add a fuel stabilizer to the gas tank before storage. This will help to keep the fuel fresh and prevent it from breaking down, which can cause damage to the carburetor or fuel injection system.

If you can't fill the tank, you can also drain the fuel tank as much as possible, run the engine until it stalls, and add a fuel stabilizer to the remaining fuel. This will help to prevent the fuel from breaking down, and also reduce the risk of moisture entering the tank and causing rust.

While it is not strictly necessary to cover your motorcycle while in storage, it is highly recommended. A cover can help protect your motorcycle from dust, debris, and other environmental factors that can cause damage over time.

A motorcycle cover is designed to keep dust, dirt, and other debris from settling on your motorcycle. It also protects the paint from fading, cracking or chipping and prevents scratches and dings from occurring.

A breathable cover is ideal as it allows air to circulate around the motorcycle and prevents moisture from accumulating, which can lead to rust and corrosion.

If you don't have a cover, you can use a sheet or tarp to cover your motorcycle, but make sure it is clean and doesn't have any abrasive material that can scratch the paint.

t is a good idea to disconnect the battery when storing your motorcycle for an extended period of time. If the battery is not disconnected, it may discharge over time due to the motorcycle's internal electronics drawing a small amount of power.

Disconnecting the battery will also prevent any accidental short circuits and it will also prevent any parasitic drains that can cause the battery to die.

Properly maintaining your motorcycle's tires while in storage is important to ensure they will be ready to go when you are ready to ride again. Here are a few steps to follow:

  1. Properly inflate the tires: Before storing your motorcycle, make sure the tires are properly inflated to the recommended pressure. Under-inflated tires can develop flat spots, which can be difficult to remove.
  2. Use tire stands: If possible, store the motorcycle on its center stand or on a set of rear and front paddock stands, which will take the weight off the tires and help to prevent flat spotting.
  3. Clean the tires: Clean the tires before storing the motorcycle to remove any dirt or debris that could cause damage.
  4. Use tire covers: If possible use tire covers or plastic bags to cover the tires, this will help to protect them from dust, debris and sunlight.
  5. Rotate the tires: If you plan to store the motorcycle for an extended period of time, rotate the tires every couple of months to prevent flat spotting in one area.
  6. Check the tire pressure and condition before using the motorcycle again.

By following these steps, you can help to preserve the condition of your motorcycle's tires while it is in storage and ensure they will be ready to go when you are ready to ride again.

Safe Motorcycle Storage with 24/7 Security

Depotium is proud to offer Motorcycle Storage in Quebec. Our Depotium Parking facilities are safe, secure, and gated. Our Motorcycle storage units are clean, heated, and accessible 24/7 with each customer receiving a unique entry code.

What is the best way to store my motorcycle?

If you want peace of mind when looking for winter self storage for your motorcycle, choose Depotium. Some of the benefits of our motorcycle storage include:

  • Heated Storage Units
  • Drive-Up Units
  • 24/7 Access to our storage facilities
  • Gated Parking Lots
  • Safe & Secure

Indoor Motorcycle Storage Units

Depotium has storage facilities in Quebec for your motorcycles. We are proud to offer affordable motorcycle storage in Quebec and our Reservation Centre will be happy to help you find the unit that fits your budget.

We offer heated and climate controlled facilities that are great for anything you don’t want stored in your motorcycle outside during the winter.

We have drive-up storage units that make parking your motorcycle for storage simple and easy.

Motorcycle Storage Preparation Tips

  1. Condition the leather
  2. Wash the exterior
  3. To help control humidity, use moisture control products
  4. Fill fuel tank to help prevent corroding
  5. Close off exhaust pipes
  6. Get a proper weather cover